Skip to content

Installation

From nothing to a running box and a connected app. ETM PowerSync Community installs in two ways; both lead to the same system — the same nymea version, the same engine, the same package repository. The image is nothing more than Raspberry Pi OS Lite with the APT repository steps already applied.

Downloads

What Link SHA-256 checksum
Raspberry Pi image (arm64, stable channel powersync-stable) etm-powersync-pi-stable-2026-11-19-arm64.img.xz .sha256
Android app (APK) etm-powersync-app-latest.apk .sha256
Linux app (Debian, Ubuntu, amd64, package) etm-powersync-app-linux-amd64-latest.deb .sha256
Linux app (x64, archive) etm-powersync-app-linux-x64-latest.tar.gz .sha256
Web app (demo) app.etm-powersync.fr —
Windows app coming —
Checking a SHA-256 checksum

Download the file and its .sha256 into the same folder, then:

# Linux, macOS
sha256sum -c etm-powersync-app-latest.apk.sha256      # expected: "OK"
# Windows
certutil -hashfile etm-powersync-app-latest.apk SHA256

On Windows, compare the checksum shown with the one in the .sha256 file (open it with Notepad). If they differ, do not install it: download it again.

Installing the app

Android — open the downloaded APK; Android asks you to allow installation from this source (the browser or the file manager): accept for this one install. The app has carried its final identifier eu.etmschurig.powersync since version 263. If an older version, installed under another name, is on the phone, uninstall it once before installing the new one; later updates install over it.

Linux — unpack the archive and start the app:

tar -xzf etm-powersync-app-linux-x64-latest.tar.gz
./etm-powersync-app/etm-powersync-app

It needs libgtk-3-0 and libsecret-1-0, present on most desktops (otherwise: sudo apt install libgtk-3-0 libsecret-1-0).

Web — app.etm-powersync.fr only opens the demo. It does not connect to a box on the local network: the box presents a self-signed certificate, which the browser refuses. Use the Android or Linux app.

Choosing your path

For whom: a Raspberry Pi dedicated to PowerSync, without a command line.

Hardware: a Raspberry Pi (see hardware) and its original power supply, a microSD card (16 GB recommended, 8 GB minimum), preferably an Ethernet cable, a computer with Raspberry Pi Imager.

Approximate time: 15 to 20 minutes, including writing the card.

  1. Download the image (Downloads) and check its checksum.
  2. In Raspberry Pi Imager, choose your model, then Use custom and the .img.xz file, then the microSD card.
  3. Accept to edit the settings: hostname etm-powersync, your account and its password, Wi-Fi if the box is not on Ethernet, SSH if you want to administer it.
  4. Write the card, insert it, connect the network then the power supply.
  5. Wait a few minutes: on first boot, the card is expanded and the Raspberry Pi reboots once.

It works when the box answers on the network as etm-powersync.local (ping etm-powersync.local) and the app shows it under Found on this network.

Details, pitfalls and checks: Raspberry Pi image.

For whom: a Debian 13 ("trixie") 64-bit machine already running — mini-PC, server, virtual machine, or Raspberry Pi under Raspberry Pi OS Lite 64-bit.

Hardware: amd64 or arm64, sudo access and Internet.

Approximate time: about 10 minutes.

  1. Install the tools:

    sudo apt update && sudo apt install -y curl gpg
    
  2. Add the repository's signing key, then check its fingerprint:

    curl -fsSL https://repos.etm-powersync.fr/public.key | sudo gpg --dearmor -o /usr/share/keyrings/powersync.gpg
    gpg --show-keys --with-fingerprint /usr/share/keyrings/powersync.gpg
    

    You must read PowerSync Repository <repo@etm-powersync.fr> and the fingerprint 7703 3A6E ED63 EE91 FE92 98C3 A68A 697A 9D1B 4986. If it differs, stop there (see APT repository).

  3. Declare the repository source (powersync-stable channel):

    sudo tee /etc/apt/sources.list.d/powersync.sources > /dev/null <<'SRC'
    Types: deb
    URIs: https://repos.etm-powersync.fr
    Suites: powersync-stable
    Components: main non-free
    Signed-By: /usr/share/keyrings/powersync.gpg
    SRC
    
  4. Install PowerSync:

    sudo apt update && sudo apt install -y powersync-core
    

    It brings the validated device plugins with it (powersync-plugins-supported).

  5. Check that the box responds:

    systemctl is-active nymead      # expected: active
    ss -ltn | grep -E ':(4444|2222) '
    

Details and explanations: APT repository.

Then, for both paths

  1. First connection: the app finds the box, you confirm its certificate fingerprint, then you create the administrator account and the user account.
  2. The app: add the devices, set up the EMS.
  3. Configuration: what is set, and where.

Updating

Whatever the path, including for a box installed from the image:

sudo apt update && sudo apt upgrade

Reinstalling does not update

sudo apt install powersync-core on a box where it is already installed does not update the engine: apt upgrade does.

Hardware

Hardware Path Status
Raspberry Pi Zero 2 W image or APT repository reference machine: it runs the published packages continuously
Raspberry Pi 3 B / 3 B+ image image tested
Raspberry Pi 4, Raspberry Pi 5, Compute Module 5 image or APT repository not tested yet
PC or virtual machine under Debian 13 (amd64 or arm64) APT repository being validated

A 64-bit system is required: packages are published for arm64 and amd64; 32-bit boards are not supported.

PowerSync runs on a Raspberry Pi Zero 2 W (512 MB of RAM): less than 100 MB of memory and a few percent of CPU in normal operation. The software takes about 150 MB on disk, the energy history a few tens of MB per year. An 8 GB SD card is enough for the image, 16 GB are recommended.

Prefer an Ethernet link to Wi-Fi: the box talks constantly to the inverter, the meter and the charger.