Skip to content

ABB B2x meter

TESTING ETM

Connection: LOCAL

Connect ABB B21 / B23 / B24 energy meters via Modbus RTU.

The ABB B2x energy meter communicates over Modbus RTU on the hub's RS485 bus. Three-phase measurement (voltages, currents and power per phase).

1. Hardware required

  • An ABB B2x meter
  • A USB↔RS485 adapter on the hub side
  • Bus cable, 2 cores (A/B) + ground

2. RS485 wiring

A↔A, B↔B, common ground, 120 Ω at the end of the bus.

3. Modbus addressing

A unique slave address on the bus (1–254, default 1).

4. Adding in PowerSync

Added by automatic discovery or manually (entering the slave address). See Adding a device.


Reference

Application labels

The keys and labels below are the ones the application shows, in English. They are left verbatim so that you find them word for word on screen.

Manufacturer: ABB
Plugin: AbbB2x

Supported models

Model Role Transport Pairing Quantities
ABB B2x energy meter Energy meter Modbus RTU Auto-discovery / Manual 14

Per-model detail

ABB B2x energy meter — abbB2x

Discovery parameters:

Key Label Type Range Default
slaveAddress Modbus slave address uint 1–254 1

Settings:

Key Label Type Range Default Read-only
slaveAddress Modbus slave address uint 1–254 1 yes
modbusMasterUuid Modbus RTU master QString — — yes

Measured quantities:

Key Quantity Type Unit
connected Connected bool —
currentPower Current power double Watt
totalEnergyConsumed Total energy consumed double KiloWattHour
totalEnergyProduced Total energy produced double KiloWattHour
frequency Frequency double Hertz
voltagePhaseA Voltage phase A double Volt
voltagePhaseB Voltage phase B double Volt
voltagePhaseC Voltage phase C double Volt
currentPhaseA Current phase A double Ampere
currentPhaseB Current phase B double Ampere
currentPhaseC Current phase C double Ampere
currentPowerPhaseA Current power phase A double Watt
currentPowerPhaseB Current power phase B double Watt
currentPowerPhaseC Current power phase C double Watt