What's new¶
ETM PowerSync publishes one stable release per quarter, on the powersync-stable channel.
This page describes those stable releases, and only them.
To try new features before the next stable release, the powersync-testing channel receives more
recent, less proven versions (see APT repository).
Stable release of 20 November 2026¶
Charging station: Auto and Manual¶
- Two modes. Auto: sun first, off-peak hours next. Manual: a Charge switch, on to charge at full power, off to stop the station; when unplugged, the station goes back to Auto by itself.
- The minimum solar coverage: the share of the station's minimum the sun must cover, from 0 to 100 %, one setting for all stations, in EMS settings. 100 % on a new box; an updated box takes over its former start setting.
- When the station is allowed to charge and the car draws nothing, the app says so, instead of showing the station as charging.
See Solar surplus.
Car: Schedule charging¶
- Schedule charging sets, for the car assigned to the station, a minimum SoC, a target SoC, a departure time and a margin.
- The box serves the minimum SoC on its own: below it, the station charges from the grid at full power, up to the minimum + 2 points. During off-peak hours, it stops at the target SoC.
- The target SoC and the departure time are planned only with an optimizer, which is not supplied with the box. On its own, the box does not guarantee the target SoC by the departure time.
- While the car is plugged in, the box reads its SoC again, every 30 minutes at most, when its integration allows it.
See Car charging.
Peak price¶
- A slot costing at least twice the lowest price of the tariff is at the peak price.
- At the peak price, the box buys nothing from the grid for the car without your consent. Below the minimum SoC, the app asks you to Charge at the peak price or to wait, and warns you before the peak price when it is already known.
- The SG-Ready heat pump is blocked at the peak price, at most 2 hours per expensive period; with a meter, the box learns the real power of each of its states.
- The feed-in price of the surplus is set separately, on the Surplus export card.
See Tariffs and SG-Ready heat pump.
EDF contract¶
- The box can take its prices from an EDF contract on the Tarif Bleu (France: Base, peak / off-peak hours, EJP), chosen in Tariff › Tariff source, instead of the entered tariff. Computed on the box, with no network connection. If the contract stops publishing prices, the box falls back to the entered tariff and says so.
- EJP: declare the day before the peak day announced by EDF, EJP day tomorrow on the Tariff favourite; with the regulated tariff shipped, the peak of a declared day is at the peak price.
See Tariffs.
App¶
- In three languages: French, German, English. By default, the phone's language; change it in Settings › Personalisation › Language.
- Notifications on Android and Linux, with the app running in the background: peak-price consent request, box update available, target that will not be met.
- Target will not be met: when an optimizer foresees that the car will not reach its target, the app says so, with what will be missing.
- Update available: an orange dot on Settings and Updates, in the administrator session. Nothing is installed without your action.
- Animated energy flow: your home and its equipment, to choose in Appearance › Energy flow style.
- Renaming a device also renames the load it controls.
- Upcoming kWh prices and an alert at the top of the screen at the peak price.
- The station's commands (Auto, Manual, Charge) on its page and on its tile in Favourites.
- Devices offline: an orange dot on the connection icon at the top of the screen; a tap opens Devices, filtered on Offline only.
Package versions¶
| Package | Version | Description (from the package) |
|---|---|---|
etm-powersync-identity |
0.1.2 |
ETM-PowerSync - identité de la box (numéro de série, UUID nymead) |
etm-powersync-remoteproxyclient |
1.15.2+etm1 |
ETM-PowerSync remote proxy client library for nymead |
etm-powersync-reset-comptes |
0.1.0 |
ETM-PowerSync - remise à zéro des comptes de la box par accès physique |
libnymea-core |
1.15.2+202606191336~trixie1 |
nymea:core internal - library |
libnymea-energy |
1.15.2+etm3 |
Library for nymea energy experience plugins |
libnymea-gpio |
1.15.2+202606191336~trixie1 |
Qt based library for GPIO interaction. |
libnymea-modbus |
1.15.2+202606191336~trixie1 |
nymea modbus integration plugins library |
libnymea-mqtt |
1.15.2+202606191336~trixie1 |
nymea-mqtt library |
libnymea-networkmanager |
1.15.2+202606191336~trixie1 |
Qt based library for the network-manager DBus API. |
libnymea-remoteproxyclient |
1.15.2+202606191336~trixie1 |
The nymea remote proxy server client lib |
libnymea-sunspec1 |
1.15.2+202606191336~trixie1 |
nymea.io sunspec library |
libnymea-zigbee1 |
1.15.2+202606191336~trixie1 |
Qt 6 based library for ZigBee |
libnymea1 |
1.15.2+202606191336~trixie1 |
nymea shared resources - library |
nymea-data |
1.15.2+202606191336~trixie1 |
Optional data for extending functionality in nymea daemon - data |
nymea-experience-plugin-energy |
1.15.2+etm3 |
nymea experiece plugin for energy related use cases |
nymea-plugin-generic-car |
1.15.2+202606191336~trixie1 |
nymea integration plugin for generic cars |
nymea-plugin-sunspec-etm01 |
1.15.2+etm16 |
SunSpec Modbus devices, ETM fork with Fronius support - vendored |
nymea-plugin-tasmota |
1.15.2+202606191336~trixie1 |
nymea integration plugin for Sonoff-Tasmota devices |
nymea-translations |
1.15.2+202606191336~trixie1 |
Translation files for nymead - translations |
nymead |
1.15.2+202606191336~trixie1 |
An open source IoT server - daemon |
powersync-core |
1.0.11 |
ETM-PowerSync core - serveur nymea et moteur de gestion d'énergie |
powersync-energy-plugin-nymea |
1.15.2+etm85 |
ETM PowerSync energy plugin for nymea (fork Qt6) |
powersync-plugin-eastron |
1.15.2+etm16 |
PowerSync integration plugin for Eastron SDM energy meters (Modbus RTU) |
powersync-plugin-generic-energy |
1.15.2+etm18 |
PowerSync integration plugin for generic energy things (ETM fork) |
powersync-plugin-openmeteo |
1.15.2+etm18 |
PowerSync integration plugin for Open-Meteo weather data |
powersync-plugin-v2c |
1.15.2+etm21 |
PowerSync integration plugin for V2C Trydan wallboxes over HTTP |
powersync-plugins-supported |
1.0.11 |
ETM-PowerSync plugins - appareils validés par ETM |
powersync-update-plugin-packagekit |
1.15.2+etm2 |
ETM-PowerSync update plugin for nymea (PackageKit, ETM channels) |
Source: powersync-stable index, arm64, as published on the release day (Packages sha256 cff43394e6b6): powersync-core and every package it pulls in from repos.etm-powersync.fr.