Skip to content

The ETM PowerSync app

The box has no web interface: you monitor it, set it up and add devices to it with the ETM PowerSync app, for Android and Linux.

Installing the app

The files are on repos.etm-powersync.fr/telechargements, each with its .sha256 checksum (see Downloads to verify it):

System File
Android etm-powersync-app-latest.apk — signed app, identifier eu.etmschurig.powersync
Linux (Debian, Ubuntu, amd64) etm-powersync-app-linux-amd64-latest.deb
Linux (x64, other distributions) etm-powersync-app-linux-x64-latest.tar.gz

Android — open the APK and allow installation from this source for this one install.

An old test version stays alongside

The app has a new identifier: it does not replace a test version installed earlier under another name. Uninstall the old one; later updates then install over the new app.

Linux, from the APT repository (recommended on Debian and Ubuntu: updates come with apt upgrade) — add the repository key and source as in APT repository, steps 1 to 3, then:

sudo apt update
sudo apt install etm-powersync-app

Linux, from the .deb file — sudo apt install ./etm-powersync-app-linux-amd64-latest.deb (apt also installs the dependencies; dpkg -i does not). The app appears in the menu as “ETM PowerSync” and also starts with etm-powersync-app.

Linux, from the archive — unpack it and run ./etm-powersync-app/etm-powersync-app (it needs libgtk-3-0 and libsecret-1-0).

On Linux, the password is kept in the desktop keyring (GNOME Keyring or KWallet); without a keyring, the app asks for it again at each start.

Web — app.etm-powersync.fr opens the demo only, not your box.

Connecting to the box

The first connection is made from the local network:

  1. the app finds the box on the local network (or you enter its address);
  2. it shows the fingerprint of the box's certificate; you confirm it and the app remembers it — if the certificate changes later, the app refuses to connect;
  3. on a new box, the installer creates two accounts: an administrator account, to set up the installation, and a user account, for the customer.

Day to day, the app is connected with the user account: it can monitor and control, not change the installation.

The menu

The app is in French, German and English: by default the phone's language, to change in Settings › Personalisation › Language.

Section What it holds
Main view the dashboard, energy, devices, favourites (list set in Settings → Active screens)
Configuration Tariff, Settings
Administration Switch to administrator, then, in an administrator session: EMS settings, Add a device, Modbus RTU, Leave administrator mode
Support the documentation, the Telegram channel, the bug report

The administrator session

To change the installation, tap Switch to administrator (in the menu or in Settings) and enter the administrator name and password — every time.

  • The administrator session token is never kept on the phone: only the user account's is.
  • The app goes back to the user account by itself as soon as it moves to the background, is closed or the phone locks, and after 15 minutes without a touch. You can also leave it by hand: Leave administrator mode.

Administrator-only screens say so; with the user account, the Tariff can be read but not changed.

Adding a device

In an administrator session, Add a device: pick the model, then Discover devices. The app looks for the device on the local network (or on the Modbus RTU bus) and adds it without entering any parameters: you only give it a name.

Discovery currently covers these devices of ours:

Device Note
Eastron SDM meters on a Modbus RTU bus: first declare the serial adapter in Modbus RTU
Fronius inverter and battery (SunSpec) on the local network
V2C Trydan charger on the local network

The Tasmota relay and the Open-Meteo site cannot be added from the app yet.

EMS settings

In an administrator session, EMS settings gathers what the engine needs to know:

  • the grid meter: the meter at the head of the installation, on which the engine measures the surplus and protects the subscribed power. If the box refuses it, the screen says so;
  • the controllable loads: each load's device, its setting, and their priority order (drag to reorder: the first one served by the surplus is at the top);
  • the battery reserve, when there is a battery;
  • Chargers · Auto mode: the minimum solar coverage, from 0 to 100 % in steps of 10, one setting for all charging stations (see Solar surplus).

The Tariff (Configuration menu) is also set in an administrator session: off-peak and peak prices, off-peak hours, feed-in price.

The charging station

On the charging station's page as on its tile in Favourites, MODE offers Auto and Manuel (manual). In Manuel, the Charge switch sits next to it: on, the station charges at full power; off, it is stopped. When unplugged, the station goes back to Auto by itself. Details on the Solar surplus page.

Forcing the water heater

On the water heater's card, Force heating… heats the tank at full power for 1 h, 2 h or 4 h, then solar control resumes.

Appearance

Settings → Appearance:

  • Theme: light, dark or the system's;
  • Text size: from small to large, on top of the size set on the phone.