Shelly¶
STABLE NYMEA CONSUMER
Verbindung: LOKAL
Shelly-Geräte mit nymea verwenden.
Installationsanleitung folgt.
Referenz¶
Bezeichnungen der Anwendung
Die Schlüssel und Bezeichnungen unten sind die der Anwendung, auf Englisch. Sie bleiben unverändert, damit Sie sie auf dem Bildschirm wortgleich wiederfinden.
Hersteller: Shelly
Plugin: shelly
Unterstützte Modelle¶
| Modell | Rolle | Transport | Einbindung | Messwerte |
|---|---|---|---|---|
| Shelly 1 | gateway, update | — | Auto-discovery | 6 |
| Shelly Plus 1 | gateway, update | — | Auto-discovery | 6 |
| Shelly 1PM | gateway, Consumption meter, update | — | Auto-discovery | 8 |
| Shelly Plus 1PM | gateway, Consumption meter, update | — | Auto-discovery | 8 |
| Shelly Pro 1PM | gateway, Consumption meter, update | — | Auto-discovery | 8 |
| Shelly 1L | gateway, Consumption meter, update | — | Auto-discovery | 8 |
| Shelly 2 | gateway, update | — | Auto-discovery | 7 |
| Shelly 2.5 | gateway, update | — | Auto-discovery | 7 |
| Shelly Plus 2PM | gateway, update | — | Auto-discovery | 7 |
| Shelly Plus Plug S/US/UK/IT | powersocket, Consumption meter, update | — | Auto-discovery | 8 |
| Shelly Plug/PlugS | powersocket, Consumption meter, update | — | Auto-discovery | 8 |
| Shelly RGBW2 | colorlight, update | — | Auto-discovery | 11 |
| Shelly Dimmer (2) / Vintage | dimmablelight, update | — | Auto-discovery | 8 |
| Shelly button 1 | longpressmultibutton, battery, update | — | Auto-discovery | 7 |
| Shelly I3 | longpressmultibutton, update | — | Auto-discovery | 8 |
| Shelly H&T | temperaturesensor, humiditysensor, battery, update | — | Auto-discovery | 9 |
| Shelly TRV | thermostat, temperaturesensor, battery, update | — | Auto-discovery | 13 |
| Shelly Flood | watersensor, temperaturesensor, battery, update | — | Auto-discovery | 9 |
| Shelly Smoke | firesensor, temperaturesensor, battery, update | — | Auto-discovery | 9 |
| Shelly Plus Smoke | firesensor, battery, update | — | Auto-discovery | 9 |
| Shelly Gas | gassensor, update | — | Auto-discovery | 10 |
| Shelly switch | powerswitch | — | Automatic | 3 |
| Shelly 3EM (gen1) | Energy meter, update | — | Auto-discovery | 27 |
| Shelly Pro 3EM (120A / 400A) | Energy meter, update | — | Auto-discovery | 24 |
| Shelly 3EM (Gen3) | Energy meter, update | — | Auto-discovery | 24 |
| Shelly EM | gateway, power, update | — | Auto-discovery | 6 |
| Shelly Power meter Channel | Consumption meter | — | Automatic | 4 |
| Shelly EM Channel | Energy meter | — | Automatic | 7 |
| Shelly Motion | presencesensor, lightsensor, update, battery | — | Auto-discovery | 10 |
| Shelly connected Roller Shutter | extendedshutter, Consumption meter | — | Automatic | 6 |
| Shelly Addon temperature sensor | temperaturesensor | — | Automatic | 3 |
Detail je Modell¶
Shelly 1 — shelly1
Einstellungen:
| Schlüssel | Bezeichnung | Typ | Bereich | Standard | Nur lesen |
|---|---|---|---|---|---|
id |
Shelly ID | QString | — | — | ja |
coapMode |
CoIoT peer mode | QString | — | unicast |
nein |
username |
Username (optional) | QString | — | — | nein |
password |
Password (optional) | QString | — | — | nein |
Gemessene Größen:
| Schlüssel | Größe | Typ | Einheit |
|---|---|---|---|
power |
Powered | bool | — |
connected |
Connected | bool | — |
signalStrength |
Signal strength | uint | Percentage |
updateStatus |
Update status | QString | — |
currentVersion |
Firmware version | QString | — |
availableVersion |
Available firmware version | QString | — |
Shelly Plus 1 — shellyPlus1
Einstellungen:
| Schlüssel | Bezeichnung | Typ | Bereich | Standard | Nur lesen |
|---|---|---|---|---|---|
id |
Shelly ID | QString | — | — | ja |
Gemessene Größen:
| Schlüssel | Größe | Typ | Einheit |
|---|---|---|---|
power |
Powered | bool | — |
connected |
Connected | bool | — |
signalStrength |
Signal strength | uint | Percentage |
updateStatus |
Update status | QString | — |
currentVersion |
Firmware version | QString | — |
availableVersion |
Available firmware version | QString | — |
Shelly 1PM — shelly1pm
Einstellungen:
| Schlüssel | Bezeichnung | Typ | Bereich | Standard | Nur lesen |
|---|---|---|---|---|---|
id |
Shelly ID | QString | — | — | ja |
coapMode |
CoIoT peer mode | QString | — | unicast |
nein |
username |
Username (optional) | QString | — | — | nein |
password |
Password (optional) | QString | — | — | nein |
Gemessene Größen:
| Schlüssel | Größe | Typ | Einheit |
|---|---|---|---|
power |
Powered | bool | — |
connected |
Connected | bool | — |
signalStrength |
Signal strength | uint | Percentage |
updateStatus |
Update status | QString | — |
currentVersion |
Firmware version | QString | — |
availableVersion |
Available firmware version | QString | — |
totalEnergyConsumed |
Total energy consumed | double | KiloWattHour |
currentPower |
Current power consumption | double | Watt |
Shelly Plus 1PM — shellyPlus1pm
Einstellungen:
| Schlüssel | Bezeichnung | Typ | Bereich | Standard | Nur lesen |
|---|---|---|---|---|---|
id |
Shelly ID | QString | — | — | ja |
Gemessene Größen:
| Schlüssel | Größe | Typ | Einheit |
|---|---|---|---|
power |
Powered | bool | — |
connected |
Connected | bool | — |
signalStrength |
Signal strength | uint | Percentage |
updateStatus |
Update status | QString | — |
currentVersion |
Firmware version | QString | — |
availableVersion |
Available firmware version | QString | — |
totalEnergyConsumed |
Total energy consumed | double | KiloWattHour |
currentPower |
Current power consumption | double | Watt |
Shelly Pro 1PM — shellyPro1Pm
Einstellungen:
| Schlüssel | Bezeichnung | Typ | Bereich | Standard | Nur lesen |
|---|---|---|---|---|---|
id |
Shelly ID | QString | — | — | ja |
Gemessene Größen:
| Schlüssel | Größe | Typ | Einheit |
|---|---|---|---|
power |
Powered | bool | — |
connected |
Connected | bool | — |
signalStrength |
Signal strength | uint | Percentage |
updateStatus |
Update status | QString | — |
currentVersion |
Firmware version | QString | — |
availableVersion |
Available firmware version | QString | — |
totalEnergyConsumed |
Total energy consumed | double | KiloWattHour |
currentPower |
Current power consumption | double | Watt |
Shelly 1L — shelly1l
Einstellungen:
| Schlüssel | Bezeichnung | Typ | Bereich | Standard | Nur lesen |
|---|---|---|---|---|---|
id |
Shelly ID | QString | — | — | ja |
coapMode |
CoIoT peer mode | QString | — | unicast |
nein |
username |
Username (optional) | QString | — | — | nein |
password |
Password (optional) | QString | — | — | nein |
Gemessene Größen:
| Schlüssel | Größe | Typ | Einheit |
|---|---|---|---|
power |
Powered | bool | — |
connected |
Connected | bool | — |
signalStrength |
Signal strength | uint | Percentage |
updateStatus |
Update status | QString | — |
currentVersion |
Firmware version | QString | — |
availableVersion |
Available firmware version | QString | — |
totalEnergyConsumed |
Total energy consumed | double | KiloWattHour |
currentPower |
Current power consumption | double | Watt |
Shelly 2 — shelly2
Einstellungen:
| Schlüssel | Bezeichnung | Typ | Bereich | Standard | Nur lesen |
|---|---|---|---|---|---|
id |
Shelly ID | QString | — | — | ja |
coapMode |
CoIoT peer mode | QString | — | unicast |
nein |
username |
Username (optional) | QString | — | — | nein |
password |
Password (optional) | QString | — | — | nein |
rollerMode |
Roller shutter mode | bool | — | False |
nein |
Gemessene Größen:
| Schlüssel | Größe | Typ | Einheit |
|---|---|---|---|
connected |
Connected | bool | — |
signalStrength |
Signal strength | uint | Percentage |
updateStatus |
Update status | QString | — |
currentVersion |
Firmware version | QString | — |
availableVersion |
Available firmware version | QString | — |
channel1 |
Power channel 1 | bool | — |
channel2 |
Power channel 2 | bool | — |
Shelly 2.5 — shelly25
Einstellungen:
| Schlüssel | Bezeichnung | Typ | Bereich | Standard | Nur lesen |
|---|---|---|---|---|---|
id |
Shelly ID | QString | — | — | ja |
coapMode |
CoIoT peer mode | QString | — | unicast |
nein |
username |
Username (optional) | QString | — | — | nein |
password |
Password (optional) | QString | — | — | nein |
rollerMode |
Roller shutter mode | bool | — | False |
nein |
Gemessene Größen:
| Schlüssel | Größe | Typ | Einheit |
|---|---|---|---|
connected |
Connected | bool | — |
signalStrength |
Signal strength | uint | Percentage |
updateStatus |
Update status | QString | — |
currentVersion |
Firmware version | QString | — |
availableVersion |
Available firmware version | QString | — |
channel1 |
Power channel 1 | bool | — |
channel2 |
Power channel 2 | bool | — |
Shelly Plus 2PM — shellyPlus25
Einstellungen:
| Schlüssel | Bezeichnung | Typ | Bereich | Standard | Nur lesen |
|---|---|---|---|---|---|
id |
Shelly ID | QString | — | — | ja |
rollerMode |
Roller shutter mode | bool | — | False |
nein |
Gemessene Größen:
| Schlüssel | Größe | Typ | Einheit |
|---|---|---|---|
connected |
Connected | bool | — |
signalStrength |
Signal strength | uint | Percentage |
updateStatus |
Update status | QString | — |
currentVersion |
Firmware version | QString | — |
availableVersion |
Available firmware version | QString | — |
channel1 |
Power channel 1 | bool | — |
channel2 |
Power channel 2 | bool | — |
Shelly Plus Plug S/US/UK/IT — shellyPlusPlug
Einstellungen:
| Schlüssel | Bezeichnung | Typ | Bereich | Standard | Nur lesen |
|---|---|---|---|---|---|
id |
Shelly ID | QString | — | — | ja |
coapMode |
CoIoT peer mode | QString | — | unicast |
nein |
username |
Username (optional) | QString | — | — | nein |
password |
Password (optional) | QString | — | — | nein |
Gemessene Größen:
| Schlüssel | Größe | Typ | Einheit |
|---|---|---|---|
power |
Powered | bool | — |
connected |
Connected | bool | — |
signalStrength |
Signal strength | uint | Percentage |
updateStatus |
Update status | QString | — |
currentVersion |
Firmware version | QString | — |
availableVersion |
Available firmware version | QString | — |
totalEnergyConsumed |
Total energy consumed | double | KiloWattHour |
currentPower |
Current power consumption | double | Watt |
Shelly Plug/PlugS — shellyPlug
Einstellungen:
| Schlüssel | Bezeichnung | Typ | Bereich | Standard | Nur lesen |
|---|---|---|---|---|---|
id |
Shelly ID | QString | — | — | ja |
coapMode |
CoIoT peer mode | QString | — | unicast |
nein |
username |
Username (optional) | QString | — | — | nein |
password |
Password (optional) | QString | — | — | nein |
Gemessene Größen:
| Schlüssel | Größe | Typ | Einheit |
|---|---|---|---|
connected |
Connected | bool | — |
signalStrength |
Signal strength | uint | Percentage |
power |
Powered | bool | — |
totalEnergyConsumed |
Total energy consumed | double | KiloWattHour |
currentPower |
Power consumption | double | Watt |
updateStatus |
Update status | QString | — |
currentVersion |
Firmware version | QString | — |
availableVersion |
Available firmware version | QString | — |
Shelly RGBW2 — shellyRgbw2
Einstellungen:
| Schlüssel | Bezeichnung | Typ | Bereich | Standard | Nur lesen |
|---|---|---|---|---|---|
id |
Shelly ID | QString | — | — | ja |
coapMode |
CoIoT peer mode | QString | — | unicast |
nein |
username |
Username (optional) | QString | — | — | nein |
password |
Password (optional) | QString | — | — | nein |
Gemessene Größen:
| Schlüssel | Größe | Typ | Einheit |
|---|---|---|---|
connected |
Connected | bool | — |
signalStrength |
Signal strength | uint | Percentage |
power |
On | bool | — |
brightness |
Brightness | int | — |
colorTemperature |
Color temperature | int | — |
color |
Color | QColor | — |
whiteChannel |
White channel | uint | — |
currentPower |
Current power consumption | double | Watt |
updateStatus |
Update status | QString | — |
currentVersion |
Firmware version | QString | — |
availableVersion |
Available firmware version | QString | — |
Shelly Dimmer (2) / Vintage — shellyDimmer
Einstellungen:
| Schlüssel | Bezeichnung | Typ | Bereich | Standard | Nur lesen |
|---|---|---|---|---|---|
id |
Shelly ID | QString | — | — | ja |
coapMode |
CoIoT peer mode | QString | — | unicast |
nein |
username |
Username (optional) | QString | — | — | nein |
password |
Password (optional) | QString | — | — | nein |
Gemessene Größen:
| Schlüssel | Größe | Typ | Einheit |
|---|---|---|---|
connected |
Connected | bool | — |
signalStrength |
Signal strength | uint | Percentage |
power |
On | bool | — |
brightness |
Brightness | int | Percentage |
currentPower |
Current power consumption | double | Watt |
updateStatus |
Firmware update status | QString | — |
currentVersion |
Firmware version | QString | — |
availableVersion |
Available firmware version | QString | — |
Shelly button 1 — shellyButton1
Einstellungen:
| Schlüssel | Bezeichnung | Typ | Bereich | Standard | Nur lesen |
|---|---|---|---|---|---|
id |
Shelly ID | QString | — | — | ja |
coapMode |
CoIoT peer mode | QString | — | unicast |
nein |
username |
Username (optional) | QString | — | — | nein |
password |
Password (optional) | QString | — | — | nein |
Gemessene Größen:
| Schlüssel | Größe | Typ | Einheit |
|---|---|---|---|
connected |
Connected | bool | — |
signalStrength |
Signal strength | uint | Percentage |
batteryLevel |
Battery level | int | Percentage |
batteryCritical |
Battery level critical | bool | — |
updateStatus |
Update status | QString | — |
currentVersion |
Current firmware version | QString | — |
availableVersion |
Available firmware version | QString | — |
Shelly I3 — shellyI3
Einstellungen:
| Schlüssel | Bezeichnung | Typ | Bereich | Standard | Nur lesen |
|---|---|---|---|---|---|
id |
Shelly ID | QString | — | — | ja |
coapMode |
CoIoT peer mode | QString | — | unicast |
nein |
username |
Username (optional) | QString | — | — | nein |
password |
Password (optional) | QString | — | — | nein |
Gemessene Größen:
| Schlüssel | Größe | Typ | Einheit |
|---|---|---|---|
connected |
Connected | bool | — |
signalStrength |
Signal strength | uint | Percentage |
input1 |
Input 1 | bool | — |
input2 |
Input 2 | bool | — |
input3 |
Input 3 | bool | — |
updateStatus |
Update status | QString | — |
currentVersion |
Firmware version | QString | — |
availableVersion |
Available firmware version | QString | — |
Shelly H&T — shellyHT
Einstellungen:
| Schlüssel | Bezeichnung | Typ | Bereich | Standard | Nur lesen |
|---|---|---|---|---|---|
id |
Shelly ID | QString | — | — | ja |
coapMode |
CoIoT peer mode | QString | — | unicast |
nein |
username |
Username (optional) | QString | — | — | nein |
password |
Password (optional) | QString | — | — | nein |
Gemessene Größen:
| Schlüssel | Größe | Typ | Einheit |
|---|---|---|---|
temperature |
Temperature | double | DegreeCelsius |
humidity |
Humidity | double | Percentage |
connected |
Connected | bool | — |
signalStrength |
Signal strength | uint | Percentage |
batteryLevel |
Battery level | int | Percentage |
batteryCritical |
Battery level critical | bool | — |
updateStatus |
Update status | QString | — |
currentVersion |
Current firmware version | QString | — |
availableVersion |
Available firmware version | QString | — |
Shelly TRV — shellyTrv
Einstellungen:
| Schlüssel | Bezeichnung | Typ | Bereich | Standard | Nur lesen |
|---|---|---|---|---|---|
id |
Shelly ID | QString | — | — | ja |
coapMode |
CoIoT peer mode | QString | — | unicast |
nein |
username |
Username (optional) | QString | — | — | nein |
password |
Password (optional) | QString | — | — | nein |
Gemessene Größen:
| Schlüssel | Größe | Typ | Einheit |
|---|---|---|---|
temperature |
Temperature | double | DegreeCelsius |
targetTemperature |
Target temperature | double | DegreeCelsius |
valvePosition |
Valve position | uint | Percentage |
heatingOn |
Heating | bool | — |
boost |
Boost | bool | — |
windowOpen |
Window open | bool | — |
connected |
Connected | bool | — |
signalStrength |
Signal strength | uint | Percentage |
batteryLevel |
Battery level | int | Percentage |
batteryCritical |
Battery level critical | bool | — |
updateStatus |
Update status | QString | — |
currentVersion |
Current firmware version | QString | — |
availableVersion |
Available firmware version | QString | — |
Shelly Flood — shellyFlood
Einstellungen:
| Schlüssel | Bezeichnung | Typ | Bereich | Standard | Nur lesen |
|---|---|---|---|---|---|
id |
Shelly ID | QString | — | — | ja |
coapMode |
CoIoT peer mode | QString | — | unicast |
nein |
username |
Username (optional) | QString | — | — | nein |
password |
Password (optional) | QString | — | — | nein |
Gemessene Größen:
| Schlüssel | Größe | Typ | Einheit |
|---|---|---|---|
waterDetected |
Water detected | bool | — |
temperature |
Temperature | double | DegreeCelsius |
connected |
Connected | bool | — |
signalStrength |
Signal strength | uint | Percentage |
batteryLevel |
Battery level | int | Percentage |
batteryCritical |
Battery level critical | bool | — |
updateStatus |
Update status | QString | — |
currentVersion |
Current firmware version | QString | — |
availableVersion |
Available firmware version | QString | — |
Shelly Smoke — shellySmoke
Einstellungen:
| Schlüssel | Bezeichnung | Typ | Bereich | Standard | Nur lesen |
|---|---|---|---|---|---|
id |
Shelly ID | QString | — | — | ja |
coapMode |
CoIoT peer mode | QString | — | unicast |
nein |
username |
Username (optional) | QString | — | — | nein |
password |
Password (optional) | QString | — | — | nein |
Gemessene Größen:
| Schlüssel | Größe | Typ | Einheit |
|---|---|---|---|
fireDetected |
Fire detected | bool | — |
temperature |
Temperature | double | DegreeCelsius |
connected |
Connected | bool | — |
signalStrength |
Signal strength | uint | Percentage |
batteryLevel |
Battery level | int | Percentage |
batteryCritical |
Battery level critical | bool | — |
updateStatus |
Update status | QString | — |
currentVersion |
Current firmware version | QString | — |
availableVersion |
Available firmware version | QString | — |
Shelly Plus Smoke — shellyPlusSmoke
Einstellungen:
| Schlüssel | Bezeichnung | Typ | Bereich | Standard | Nur lesen |
|---|---|---|---|---|---|
id |
Shelly ID | QString | — | — | ja |
Gemessene Größen:
| Schlüssel | Größe | Typ | Einheit |
|---|---|---|---|
fireDetected |
Fire detected | bool | — |
mute |
Muted | bool | — |
connected |
Connected | bool | — |
signalStrength |
Signal strength | uint | Percentage |
batteryLevel |
Battery level | int | Percentage |
batteryCritical |
Battery level critical | bool | — |
updateStatus |
Update status | QString | — |
currentVersion |
Current firmware version | QString | — |
availableVersion |
Available firmware version | QString | — |
Shelly Gas — shellyGas
Einstellungen:
| Schlüssel | Bezeichnung | Typ | Bereich | Standard | Nur lesen |
|---|---|---|---|---|---|
id |
Shelly ID | QString | — | — | ja |
coapMode |
CoIoT peer mode | QString | — | unicast |
nein |
username |
Username (optional) | QString | — | — | nein |
password |
Password (optional) | QString | — | — | nein |
Gemessene Größen:
| Schlüssel | Größe | Typ | Einheit |
|---|---|---|---|
gasLevel |
Gas level | double | PartsPerMillion |
connected |
Connected | bool | — |
signalStrength |
Signal strength | uint | Percentage |
updateStatus |
Update status | QString | — |
currentVersion |
Current firmware version | QString | — |
availableVersion |
Available firmware version | QString | — |
sensorOperation |
Sensor operation | QString | — |
selfTest |
Self test | QString | — |
gas |
Gas level index | QString | — |
valveState |
Valve state | QString | — |
Shelly switch — shellySwitch
Einstellungen:
| Schlüssel | Bezeichnung | Typ | Bereich | Standard | Nur lesen |
|---|---|---|---|---|---|
channel |
Channel | uint | — | 1 |
nein |
Gemessene Größen:
| Schlüssel | Größe | Typ | Einheit |
|---|---|---|---|
connected |
Connected | bool | — |
signalStrength |
Signal strength | uint | Percentage |
power |
On/Off | bool | — |
Shelly 3EM (gen1) — shellyEm3
Einstellungen:
| Schlüssel | Bezeichnung | Typ | Bereich | Standard | Nur lesen |
|---|---|---|---|---|---|
id |
Shelly ID | QString | — | — | ja |
coapMode |
CoIoT peer mode | QString | — | unicast |
nein |
username |
Username (optional) | QString | — | — | nein |
password |
Password (optional) | QString | — | — | nein |
Gemessene Größen:
| Schlüssel | Größe | Typ | Einheit |
|---|---|---|---|
connected |
Connected | bool | — |
signalStrength |
Signal strength | uint | Percentage |
totalEnergyConsumed |
Total consumed energy | double | KiloWattHour |
totalEnergyProduced |
Total returned energy | double | KiloWattHour |
currentPower |
Current power | double | Watt |
currentPowerPhaseA |
Power usage (Phase A) | double | Watt |
powerFactorPhaseA |
Power factor (Phase A) | double | — |
currentPhaseA |
Current (Phase A) | double | Ampere |
voltagePhaseA |
Voltage (Phase A) | double | Volt |
energyConsumedPhaseA |
Total consumed energy (Phase A) | double | KiloWattHour |
energyProducedPhaseA |
Total returned energy (Phase A) | double | KiloWattHour |
currentPowerPhaseB |
Power usage (Phase B) | double | Watt |
powerFactorPhaseB |
Power factor (Phase B) | double | — |
currentPhaseB |
Current (Phase B) | double | Ampere |
voltagePhaseB |
Voltage (Phase B) | double | Volt |
energyConsumedPhaseB |
Total consumed energy (Phase B) | double | KiloWattHour |
energyProducedPhaseB |
Total returned energy (Phase B) | double | KiloWattHour |
currentPowerPhaseC |
Power usage (Phase C) | double | Watt |
powerFactorPhaseC |
Power factor (Phase C) | double | — |
currentPhaseC |
Current (Phase C) | double | Ampere |
voltagePhaseC |
Voltage (Phase C) | double | Volt |
energyConsumedPhaseC |
Total consumed energy (Phase C) | double | KiloWattHour |
energyProducedPhaseC |
Total returned energy (Phase C) | double | KiloWattHour |
updateStatus |
Update status | QString | — |
currentVersion |
Current firmware version | QString | — |
availableVersion |
Available firmware version | QString | — |
power |
Powered | bool | — |
Shelly Pro 3EM (120A / 400A) — shellyPro3EM
Einstellungen:
| Schlüssel | Bezeichnung | Typ | Bereich | Standard | Nur lesen |
|---|---|---|---|---|---|
id |
Shelly ID | QString | — | — | ja |
username |
Username (optional) | QString | — | — | nein |
password |
Password (optional) | QString | — | — | nein |
Gemessene Größen:
| Schlüssel | Größe | Typ | Einheit |
|---|---|---|---|
connected |
Connected | bool | — |
signalStrength |
Signal strength | uint | Percentage |
totalEnergyConsumed |
Total consumed energy | double | KiloWattHour |
totalEnergyProduced |
Total returned energy | double | KiloWattHour |
currentPower |
Current power | double | Watt |
currentPowerPhaseA |
Power usage (Phase A) | double | Watt |
currentPhaseA |
Current (Phase A) | double | Ampere |
voltagePhaseA |
Voltage (Phase A) | double | Volt |
energyConsumedPhaseA |
Total consumed energy (Phase A) | double | KiloWattHour |
energyProducedPhaseA |
Total returned energy (Phase A) | double | KiloWattHour |
currentPowerPhaseB |
Power usage (Phase B) | double | Watt |
currentPhaseB |
Current (Phase B) | double | Ampere |
voltagePhaseB |
Voltage (Phase B) | double | Volt |
energyConsumedPhaseB |
Total consumed energy (Phase B) | double | KiloWattHour |
energyProducedPhaseB |
Total returned energy (Phase B) | double | KiloWattHour |
currentPowerPhaseC |
Power usage (Phase C) | double | Watt |
currentPhaseC |
Current (Phase C) | double | Ampere |
voltagePhaseC |
Voltage (Phase C) | double | Volt |
energyConsumedPhaseC |
Total consumed energy (Phase C) | double | KiloWattHour |
energyProducedPhaseC |
Total returned energy (Phase C) | double | KiloWattHour |
updateStatus |
Update status | QString | — |
currentVersion |
Current firmware version | QString | — |
availableVersion |
Available firmware version | QString | — |
power |
Powered | bool | — |
Shelly 3EM (Gen3) — shelly3EM
Einstellungen:
| Schlüssel | Bezeichnung | Typ | Bereich | Standard | Nur lesen |
|---|---|---|---|---|---|
id |
Shelly ID | QString | — | — | ja |
username |
Username (optional) | QString | — | — | nein |
password |
Password (optional) | QString | — | — | nein |
Gemessene Größen:
| Schlüssel | Größe | Typ | Einheit |
|---|---|---|---|
connected |
Connected | bool | — |
signalStrength |
Signal strength | uint | Percentage |
totalEnergyConsumed |
Total consumed energy | double | KiloWattHour |
totalEnergyProduced |
Total returned energy | double | KiloWattHour |
currentPower |
Current power | double | Watt |
currentPowerPhaseA |
Power usage (Phase A) | double | Watt |
currentPhaseA |
Current (Phase A) | double | Ampere |
voltagePhaseA |
Voltage (Phase A) | double | Volt |
energyConsumedPhaseA |
Total consumed energy (Phase A) | double | KiloWattHour |
energyProducedPhaseA |
Total returned energy (Phase A) | double | KiloWattHour |
currentPowerPhaseB |
Power usage (Phase B) | double | Watt |
currentPhaseB |
Current (Phase B) | double | Ampere |
voltagePhaseB |
Voltage (Phase B) | double | Volt |
energyConsumedPhaseB |
Total consumed energy (Phase B) | double | KiloWattHour |
energyProducedPhaseB |
Total returned energy (Phase B) | double | KiloWattHour |
currentPowerPhaseC |
Power usage (Phase C) | double | Watt |
currentPhaseC |
Current (Phase C) | double | Ampere |
voltagePhaseC |
Voltage (Phase C) | double | Volt |
energyConsumedPhaseC |
Total consumed energy (Phase C) | double | KiloWattHour |
energyProducedPhaseC |
Total returned energy (Phase C) | double | KiloWattHour |
updateStatus |
Update status | QString | — |
currentVersion |
Current firmware version | QString | — |
availableVersion |
Available firmware version | QString | — |
power |
Powered | bool | — |
Shelly EM — shellyEm
Einstellungen:
| Schlüssel | Bezeichnung | Typ | Bereich | Standard | Nur lesen |
|---|---|---|---|---|---|
id |
Shelly ID | QString | — | — | ja |
coapMode |
CoIoT peer mode | QString | — | unicast |
nein |
username |
Username (optional) | QString | — | — | nein |
password |
Password (optional) | QString | — | — | nein |
Gemessene Größen:
| Schlüssel | Größe | Typ | Einheit |
|---|---|---|---|
connected |
Connected | bool | — |
signalStrength |
Signal strength | uint | Percentage |
updateStatus |
Update status | QString | — |
currentVersion |
Current firmware version | QString | — |
availableVersion |
Available firmware version | QString | — |
power |
Powered | bool | — |
Shelly Power meter Channel — shellyPowerMeterChannel
Einstellungen:
| Schlüssel | Bezeichnung | Typ | Bereich | Standard | Nur lesen |
|---|---|---|---|---|---|
id |
Shelly ID | QString | — | — | ja |
channel |
Channel | uint | — | 1 |
nein |
Gemessene Größen:
| Schlüssel | Größe | Typ | Einheit |
|---|---|---|---|
connected |
Connected | bool | — |
signalStrength |
Signal strength | uint | Percentage |
totalEnergyConsumed |
Total consumed energy | double | KiloWattHour |
currentPower |
Current power | double | Watt |
Shelly EM Channel — shellyEmChannel
Einstellungen:
| Schlüssel | Bezeichnung | Typ | Bereich | Standard | Nur lesen |
|---|---|---|---|---|---|
id |
Shelly ID | QString | — | — | ja |
channel |
Channel | uint | — | 1 |
nein |
Gemessene Größen:
| Schlüssel | Größe | Typ | Einheit |
|---|---|---|---|
connected |
Connected | bool | — |
signalStrength |
Signal strength | uint | Percentage |
totalEnergyConsumed |
Total consumed energy | double | KiloWattHour |
totalEnergyProduced |
Total returned energy | double | KiloWattHour |
currentPower |
Current power | double | Watt |
currentPhaseA |
Current | double | Ampere |
voltagePhaseA |
Voltage | double | Volt |
Shelly Motion — shellyMotion
Einstellungen:
| Schlüssel | Bezeichnung | Typ | Bereich | Standard | Nur lesen |
|---|---|---|---|---|---|
id |
Shelly ID | QString | — | — | ja |
coapMode |
CoIoT peer mode | QString | — | unicast |
nein |
username |
Username (optional) | QString | — | — | nein |
password |
Password (optional) | QString | — | — | nein |
Gemessene Größen:
| Schlüssel | Größe | Typ | Einheit |
|---|---|---|---|
isPresent |
Person is present | bool | — |
lightIntensity |
Light intensity | double | Lux |
vibration |
Vibration | bool | — |
connected |
Connected | bool | — |
signalStrength |
Signal strength | uint | Percentage |
updateStatus |
Update status | QString | — |
currentVersion |
Current firmware version | QString | — |
availableVersion |
Available firmware version | QString | — |
batteryCritical |
Battery level critical | bool | — |
batteryLevel |
Battery level | int | Percentage |
Shelly connected Roller Shutter — shellyRoller
Einstellungen:
| Schlüssel | Bezeichnung | Typ | Bereich | Standard | Nur lesen |
|---|---|---|---|---|---|
channel |
Channel | uint | — | 1 |
nein |
Gemessene Größen:
| Schlüssel | Größe | Typ | Einheit |
|---|---|---|---|
connected |
Connected | bool | — |
signalStrength |
Signal strength | uint | Percentage |
totalEnergyConsumed |
Total energy consumed | double | KiloWattHour |
currentPower |
Current power consumption | double | Watt |
moving |
Moving | bool | — |
percentage |
Position | int | Percentage |
Shelly Addon temperature sensor — shellyAddonTempSensor
Einstellungen:
| Schlüssel | Bezeichnung | Typ | Bereich | Standard | Nur lesen |
|---|---|---|---|---|---|
addonId |
ID | QString | — | — | nein |
Gemessene Größen:
| Schlüssel | Größe | Typ | Einheit |
|---|---|---|---|
connected |
Connected | bool | — |
signalStrength |
Signal strength | uint | Percentage |
temperature |
Temperature | double | DegreeCelsius |